2005 WRX Map Package

  • Model: XPT05APMAPS
  • 4998 Units in Stock

 Ask a Question 

$400.00

Please Choose:



XPT Map Package
2005 USDM Subaru Impreza WRX
Product Description


Staged mapping for your 2005 WRX using an AccessPORT V2/V2B or greater

POWER. FLEXIBILITY. CONTROL. The AccessPORT is the industry leading OEM ECU flashing, managing and monitoring assistant. Unlock power hidden within the ECU by replacing conservative factory settings with more aggressive calibrations. The result is impressive gains in torque and horsepower while maintaining a high degree of safety. The AccessPORT normally comes with pre-installed maps that are fairly conservative.
 

Unlock the true potential of your vehicle and modifications with our fully custom tuned XPT calibrations!

The following calibrations are included with the XPT map package.  This set of maps will take you from a standard Stage2 setup with basic bolt ons, all the way through a Stage2.5 equipped vehicle with a VF39!  If purchased separately these calibrations would cost over $400!
 

XPT Stage2 91 - Intended for use on a 2005 WRX with stock airbox and K&N Panel Filter, stock fuel injectors, an aftermarket up-pipe, and a turbo-back exhaust system. Must use a minimum of 91 or 92 octane. MUST USE K&N Panel Filter OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~16.5psi +/- 0.5psi peak boost pressure tapering down to ~13psi, depending on vehicle and conditions.

XPT Stage2 93 - Intended for use on a 2005 WRX with stock airbox and K&N Panel Filter, stock fuel injectors, an aftermarket up-pipe,and a turbo-back exhaust system. Must use a minimum of 93 or 94 octane. MUST USE K&N Panel Filter OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~16.5psi +/- 0.5psi peak boost pressure tapering down to ~13psi, depending on vehicle and conditions.

XPT Stage2 GM BCS - Intended for use on a 2005 WRX with stock airbox and K&N Panel Filter, stock fuel injectors, a GM Boost Solenoid (or Prodrive/Tactrix), an aftermarket up-pipe, and a turbo-back exhaust system. Must use a minimum of 91 or 92 octane. MUST USE K&N Panel Filter OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~16.5psi +/- 0.5psi peak boost pressure tapering down to ~13psi, depending on vehicle and conditions.

XPT Stage2 GS EBCS - Intended for use on a 2005 WRX with stock airbox and K&N Panel Filter, stock fuel injectors, a Grimmspeed Boost Solenoid (or Perrin EBCS Pro), an aftermarket up-pipe, and a turbo-back exhaust system. Must use a minimum of 91 or 92 octane. MUST USE K&N Panel Filter OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~17.5psi +/- 0.5psi peak boost pressure tapering down to ~13psi, depending on vehicle and conditions.

XPT Stage2 GM BCS High Altitude - Intended for use on a 2005 WRX with stock airbox and K&N Panel Filter, stock fuel injectors, a GM Boost Solenoid (or Prodrive/Tactrix),an aftermarket up-pipe, and a turbo-back exhaust system. For use in High Altitude areas such as Colorado, Salt Lake City, and Albuquerque. Must use a minimum of 91 or 92 octane. MUST USE K&N Panel Filter OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~16.5psi +/- 0.5psi peak boost pressure tapering down to ~13psi, depending on vehicle and conditions.

XPT Stage2 RACE - Intended for use on a 2005 WRX with a 65mm CAI (Injen, APS, etc..), stock fuel injectors, a GM Boost Solenoid (or Prodrive/Tactrix), an aftermarket up-pipe, a turbo-back exhaust system, Turbo Inlet Hose, STi TMIC (or other aftermarket TMIC), Walbro 255lph pump (or Deatschwerks 301). Must use a minimum of 91 or 92 octane. MUST USE a 65MM INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~20psi +/- 1.0psi peak boost pressure tapering down to ~13psi, depending on vehicle and conditions.

XPT Stage2.5 91 - Intended for use on a 2005 WRX with a VF39 STi Turbo, a GM Boost Solenoid (or Prodrive/Tactrix), an aftermarket up-pipe, a turbo-back exhaust system, STi TMIC (or other aftermarket TMIC), Walbro 255lph pump (or Deatschwerks 301), STi "Pink" injectors, and a K&N Panel Filter or COBB SF Intake. Must use a minimum of 91 or 92 octane. MUST USE A STOCK INTAKE SYSTEM WITH K&N PANEL FILTER OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~17psi +/- 1.0psi peak boost pressure tapering down to ~15psi, depending on vehicle and conditions.

XPT Stage2.5 93 - Intended for use on a 2005 WRX with a VF39 STi Turbo, a GM Boost Solenoid (or Prodrive/Tactrix), an aftermarket up-pipe, a turbo-back exhaust system, STi TMIC (or other aftermarket TMIC), Walbro 255lph pump (or Deatschwerks 301), STi "Pink" injectors, and a K&N Panel Filter or COBB SF Intake. Must use a minimum of 93 or 94 octane. MUST USE A STOCK INTAKE SYSTEM WITH K&N PANEL FILTER OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~17psi +/- 1.0psi peak boost pressure tapering down to ~15psi, depending on vehicle and conditions.

XPT Stage2.5 Blues - Intended for use on a 2005 WRX with a VF39 STi Turbo, a GM Boost Solenoid (or Prodrive/Tactrix), an aftermarket up-pipe, a turbo-back exhaust system, STi TMIC (or other aftermarket TMIC), Walbro 255lph pump (or Deatschwerks 301), Dark Blue 550cc Top Feed 06+WRX or 08+ STi Injectors, and a K&N Panel Filter or COBB SF Intake. Must use a minimum of 93 or 94 octane. MUST USE A STOCK INTAKE SYSTEM WITH K&N PANEL FILTER OR COBB SF INTAKE SYSTEM ONLY, NO OTHER AFTERMARKET INTAKES ARE CERTIFIED COMPATIBLE WITH THIS CALIBRATION. Boost Targets: ~17psi +/- 1.0psi peak boost pressure tapering down to ~15psi, depending on vehicle and conditions.

 

USD $165.00

Additional Information

Further instructions will be provided upon receipt of your new map package. This will include details and proper map break-in procedures/tips.
  

IMPORTANT NOTICE: Please make sure to include your AccessPORT Serial Number in the order notes so your custom maps can be compiled. Once ordered your new map package will arrive within 12-24 hours via e-mail.

Copyright 2011 XPTTuning.com. All Rights Reserved.


This product was added to our catalog on Monday 15 November, 2021.

Copyright © 2024 XPT Store. Powered by Zen Cart